Stoneage Cellphone Secret Code Nokia 6610 Series

Nokia 6610 Series

*#06# for checking the IMEI (International Mobile Equipment Identity) 
*#0000# for checking the phones software (SW) - called firmware revision information.
*#6110# Try this code if the above code doen't work.  On SW-Version 5.24 (only this version) you can check if the Sim-Clock can be Stopped with this code. (Sim-clock-stop is a kind of standby mode which will save battery time) 
*#746025625# [*#sim0clock#]  to check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time) 
*#92702689# [*#war0anty#]  Warranty code. You don't need the warranty-codes any more - you can just scroll through the information like in any other menu. It has the the same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").
1: Displays Serial Number.
2: Displays the Month and Year of Manufacture (0997) 
3: Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date (Warning: You can only do this once - so be careful what you write...) 
4: Displays the date of the last repairment - if  found (0000) 
5: Transfers ALL phone numbers, pictures, sounds from one phone to another (eg. if broken)  6110 can also transfer all data via IRport (Confirm Transfer?) 

Service Provider Lock

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Provider(???)-Lock status
#pw+1234567890+4# for SimCard-Lock status
          (master code) is a 10 digit code, based on the phones IMEI number. 
          (I can NOT give you the master code - SO DON'T ASK ME FOR IT !!!!!!!) 
Please be careful!

Enhanced Full Rate Codec (EFR): 
On: Enter *3370# and EFR will be activated after a reboot of the phone ( consumes more power )
Off: Enter #3370# and EFR will be switched off after a reboot of the phone. 

Half Rate Codec: 

On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone ( better standby time )
Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the phone 
Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression            technology. This technology allows for much great voice quality in  the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular             Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%
Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

Smart Messaging

Smartmassaging with Nokia 6110. 
With the tone 36 you can get another ringing tone via Smartmassaging ( 8110i ) 
First you  must have a 8110i, next order a new ringington with your SIM-Card in the 8110i, select one and order via SMS, if your SMS was send succesfull 
you must turn off your 8110i. Take your SIM from the 8110i into the 6110 and switch it on. After a few seconds you receive a SMS (The new ringing tone). 
Read the SMS and you can hear your new tone in the menu as tone 36. Another way of doing it (the easy way when it comes to all...) 
As far as I know, this perticular procedure only works with the 6110. Also note that some network operators does not allow you to make  international calls without first paying a deposit.



Related Posts

No comments: